Abstract:
Electrodeposition of thin film semiconductors have drawn increasing attention in the
fabrication of solar cells due to its low cost and easy fabrication methodologies applicable in
large scale production, compared to that of conventional Si solar cells. Among different types
of semiconductor thin films, cadmium zinc sulphide (CdxZn(1-x)S) thin film is one of the
promising wide band-gap window materials which can be used in fabrication of heterojunction
solar cells.
Electrodepostion of (CdxZn(1-x)S) on fluorine doped tin oxide conducting glass working
electrode was carried out using aqueous solution of electro-purified salts of CdSO4, ZnSO4
and Na2S2O3. An EG & G model 636 bipotentiostat comprising of a graphite counter
electrode and Ag/AgCl reference electrode were used to control the potential of the working
electrode. Taking into account of the information obtained from cyclic voltammograms for
the separate precursor salts, the three voltages of -0.9, -1.0 and -1.1 V were selected for
electrodeposition. Thin films were deposited at each of the above voltages, using solutions
with various proportions of Cd and Zn but the same concentration of Na2S2O3for three
deposition time periods of 1, 2 and 3 hours. The pH and temperatures for all solutions used
for depositions were maintained at 2.5 and 27 0C respectively. Photo-electrochemical cell
measurements in 0.1 mol dm-3 Na2S2O3 electrolyte and UV-visible absorption spectroscopy
were used to measure the open circuit voltages (Voc), short circuit current densities (Jsc) and
band gaps of the electrodeposited thin films.
The thin films with the highest observed photovoltaic activity of average Voc of - 0.156 V,
Jsc of 2.6 A cm-2 and a band gap in the range of 2.05 to 2.28 eV were produced from
electro-deposition solutions containing CdSO4, ZnSO4:and Na2S2O3 with 0.06, 0.04 and 0.10
mol dm-3respectively when deposited over a one hour period.
