Digital Repository

A Mössbauer study of the oxidation state of Fe in silicate melts

Show simple item record

dc.contributor.author Jayasuriya, K.D. en_US
dc.contributor.author O-Neill, H.S.C. en_US
dc.contributor.author Berry, A.J. en_US
dc.contributor.author Campbell, S.J. en_US
dc.date.accessioned 2014-11-19T04:45:59Z
dc.date.available 2014-11-19T04:45:59Z
dc.date.issued 2004
dc.identifier.issn 0003-004X en_US
dc.identifier.uri http://repository.kln.ac.lk/handle/123456789/4098
dc.description.abstract Fe3+/?Fe ratios were determined from M�ssbauer spectra recorded for a series of 17 anorthite-diopside eutectic glasses containing 1 wt% 57Fe2O3 quenched from melts equilibrated over a range of oxygen fugacities from fO2~ 105 bars (Fe3+/?Fe = 1) to 10?13 bars (Fe3+/?Fe = 0) at 1682 K. Fe3+/Fe2+ was found to be proportional to fO2 to the power of 0.245 � 0.004, in excellent agreement with the theoretical value of 0.25 expected from the stoichiometry of the reaction Fe2+O + 0.25 O2 = Fe3+O1.5. The uncertainty in the Fe3+/?Fe ratios determined by M�ssbauer spectroscopy was estimated as � 0.01 (1?) from the fit of the data to the theoretical expression, which is significantly less than that quoted for previous measurements on silicate glasses; this results from fitting the spectra of a large number of systematically varying samples, which allows many of the ambiguities associated with the fitting procedure to be minimized. Fe3+/?Fe ratios were then determined for samples of the anorthite-diopside eutectic composition equilibrated at selected values of fO2, to which up to 30 wt% Fe2O3 had been added. Fe3+/?Fe was found to vary with ?Fe (or FeOT), but both the 1 wt% and high FeOT data could be satisfactorily fit assuming the ideal stoichiometry (i.e., Fe3+/Fe2+ ?fO2 1/4) by the inclusion of a Margules term describing Fe2+-Fe3+ interactions. The large negative value of this term indicates a tendency toward the formation of Fe2+-Fe3+ complexes in the melt. The resulting expression, using the ideal exponent of 0.25, gave a fit to 289 Fe3+/?Fe values, compiled from various literature sources, of similar quality as previous empirical models which found an exponent of ~0.20. Although the empirical models reproduce Fe3+/?Fe values of glasses with high FeOT reasonably well, they describe the data for 1 wt% FeOT poorly. The non-ideal values of the exponent describing the dependence of Fe3+/?Fe on fO2 at high FeOT are an artifact of models that did not include a term explicitly to describe the Fe2+-Fe3+ interactions. An alternative model in which Fe in the silicate melt is described in terms of three species, Fe2+O, Fe3+O1.5, and the non-integral valence species Fe2.6+O1.3, was also tested with promising results. However, at present there is no model that fits the data within the assessed accuracy of the experimental measurements. en_US
dc.publisher American Mineralogist en_US
dc.title A Mössbauer study of the oxidation state of Fe in silicate melts
dc.type Article en_US
dc.identifier.department Physics en_US


Files in this item

Files Size Format View

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record

Search Digital Repository


Browse

My Account