Digital Repository

THE EFFECT OF CONCENTRATION AND PH OF CdC12 SOLUTION USED IN CdC12 TREATMENT ON THE PROPERTIES OF CdS THIN FILMS

Show simple item record

dc.contributor.author Atapattu, I I.Y.R.
dc.contributor.author De Silva, D.S.M.
dc.contributor.author Pathiratne, K.A.S.
dc.contributor.author Dharmadasa, I.M.
dc.date.accessioned 2018-10-30T11:02:29Z
dc.date.available 2018-10-30T11:02:29Z
dc.date.issued 2018
dc.identifier.citation Atapattu, I I.Y.R., De Silva, D.S.M., Pathiratne, K.A.S. and Dharmadasa, I.M. (2018). THE EFFECT OF CONCENTRATION AND PH OF CdC12 SOLUTION USED IN CdC12 TREATMENT ON THE PROPERTIES OF CdS THIN FILMS. Solar Asia 2018 Int. Conf. National Institute of Fundamental Studies, Kandy, Sri Lanka. Department of Chemistry, University of Kelaniya, Sri Lanka. p29. en_US
dc.identifier.uri http://repository.kln.ac.lk/handle/123456789/19063
dc.description.abstract Among the post deposition treatments available for development of CdS/CdTe solar cells, CdCl2 treatment has been identified as one of the key processing steps that can be effectively used for improving power conversion efficiency of the CdS/CdTe solar cell. This method was identified in late 1970s and currently is used for the CdS layers as well. The present study focuses on the effect of the concentration and pH of the CdCl2 solution used for the CdCl2 treatment on the quality of CdS layers based on their electrical, optical and morphological properties. In this study, CdS layers were potentiostatically electrodeposited on glass/FTO substrates at cathodic deposition potential of 660 mV verses a saturated calomel electrode at pH of 1.80 for 30 minutes in electrolytic baths containing 0.10 mol/L CdCl2 and 0.01 mol/L Na2S2O3. The temperature and the stirring rate of electrolytic baths were maintained constant at 55 °C and 60 rpm respectively. After the depositions, the samples were rinsed in de-ionized water and dried under a high purity N2 gas flow and conveyed for the CdCl2 treatment. Nine sets of samples with two replicates in each were treated separately with aqueous CdCl2 solutions having concentrations of 1.0, 0.5 and 0.1 mol/L and for each concentration three different pH values; as-prepared (5.60, 6.30 and 7.10 respectively), 2.00 and 6.50 were used. To perform the treatment, CdCl2 solutions were sprayed for 1 minute on the CdS layer until the layers were fully covered by the solution, allowed to dry and the samples were transferred for the process of annealing at 400 °C for 15 minutes in air. Subsequently, samples were rinsed in de-ionized water and dried under a high purity N2 gas flow. The electrical, optical and morphological properties of the CdS layers were then studied using photo-electrochemical cell measurements, UV-Vis absorption spectroscopy and scanning electron microscopy respectively. As results revealed, the CdCl2 solution with the concentration of 1.0 mol/L and the pH of 2.00 is suitable for achieving good material properties in the CdS layers. en_US
dc.language.iso en en_US
dc.publisher Solar Asia 2018 Int. Conf. National Institute of Fundamental Studies, Kandy, Sri Lanka. en_US
dc.subject Cadmium sulfide en_US
dc.subject Cadmium chloride treatment en_US
dc.subject Electrodeposition en_US
dc.subject Material I Factorization en_US
dc.title THE EFFECT OF CONCENTRATION AND PH OF CdC12 SOLUTION USED IN CdC12 TREATMENT ON THE PROPERTIES OF CdS THIN FILMS en_US
dc.type Article en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search Digital Repository


Browse

My Account