Symposia and Conferences
Permanent URI for this communityhttp://repository.kln.ac.lk/handle/123456789/151
Browse
17 results
Search Results
Item Effect of Thermal Annealing on Electrodeposited CdS and CdS/CdTe Heterojunction(Faculty of Graduate Studies, University of Kelaniya, Sri Lanka, 2016) Atapattu, H.Y.R.; de Silva, D.S.M.; Pathiratne, K.A.S.At present CdS/CdTe based solar cells have a significant commercial impression due to its lowcost, scalability, manufacturability and simplicity. Nevertheless, it is essential to elevate the optoelectronic qualities of CdS and CdTe materials and the interface properties of CdS/CdTe heterojunction and ultimately the efficiency of the solar cells. In this regard thermal annealing is one of the key steps to be considered in order to enhance the material and heterojunction properties. Hence, in this study, the effect of thermal annealing on electrodeposited CdS and CdS/CdTe heterojunction was investigated. CdS and CdTe semiconductor layers were potentiostatically electrodeposited on bare fluorine doped tin oxide (FTO) glass substrates and FTO/CdS respectively using the typical three electrode electrolytic cell. For both layers, saturated calomel electrode and high purity (99%) graphite rod were used as reference and counter electrodes respectively. 0.10 mol/L CdCl2 and 0.01 mol/L Na2S2O3 were used as Cd and S precursors respectively to produce CdS thin films while 1.35 mol/L CdSO4 and 1.0 mmol/L TeO2 were used as Cd and Te precursors respectively for CdTe. CdS layers were grown at cathodic deposition potential of 660 mV at pH 1.6 and temperature of 55 °C. Afterwards, one set of electrodeposited CdS samples was conveyed for fabrication of CdS/CdTe heterojunction. CdTe layers were grown on CdS layers at cathodic deposition potential of 650 mV at pH 2.3 and temperature of 65 °C. Subsequently, thermal annealing was carried out for both CdS and CdS/CdTe at three different temperatures; 390, 400 and 410 °C, for each annealing three different time periods; 10, 15, 20 min were considered. After the process of annealing all the samples were inspected for their optical, electrical and morphological properties using the techniques of optical absorption spectroscopy, photoelectrochemical cell and scanning electron microscopy respectively. According to the results, the optimum annealing conditions which yielded good optoelectronic qualities for CdS and CdS/CdTe were found to be 400 °C, 15 min and 390 °C, 15 min respectively.Item Optimization of three growth parameters for electrodeposition of CdS thin film semiconductor; pH, deposition temperature and deposition voltage in a stable electrolyte(Faculty of Graduate Studies, University of Kelaniya, 2015) Atapattu, H.Y.R.; De Silva, D.S.M.; Pathiratne, K.A.S.Cadmium sulfide has been identified as the most promising window material for fabrication of CdS/CdTe and CdS/CuInGaSe2 thin film solar cells. Among vast variety of commercially available CdS fabrication methods electrodeposition (ED) is a viable technique due to its low cost and simplicity. This study focuses a procedure followed for optimization of the three growth parameters; pH of the bath solution, deposition temperature and deposition voltage for ED-CdS thin films with high photovoltaic activities utilizing CdCl2 and Na2S2O3 as cadmium and sulfur precursors respectively. Based on the two initial leading experiments, feasible pH and deposition temperature ranges for a stable electrolyte which does not promote chemical bath formation of CdS were identified to be in the ranges of 1.5-2.0 and 50-70 °C respectively. Also, using cyclic voltammetry the feasible cathodic deposition voltage was identified to be in the range of 640- 720 mV with respect to saturated calomel electrode. Consequently, the technique of the design of experiment (DOE) was carried out to establish random combinations of levels of the three electrodeposition parameters amid the previously identified parameter ranges for deposition of CdS layers via the ED technique. Finally, the electrical, optical, structural and morphological properties of the CdS thin films electrodeposited under different combinations of parameter values were investigated using photo-electrochemical cell study, optical absorption spectroscopy, x-ray diffraction method and scanning electron microscopy respectively. The results indicated that, aqueous solutions in the pH range of 1.6 to 1.8 containing 0.10 M CdCl2 and 0.01 M Na2S2O3 at 55-65 °C can successfully be used for electrodeposition of thin film CdS semiconductor materials over a cathodic deposition voltage range of 650 to 680 mV with a deposition period of 20 to 40 min.Item Growth of CdS and CdTe thin film semiconductors and fabrication of CdS/CdTe solar cells(Faculty of Graduate Studies, University of Kelaniya, 2015) Kumarasinghe, K.D.M.S.P.K.; de Silva, D.S.M.; Pathiratne, K.A.S.; Dharmadasa, I.M.; Salim, H.I.; Abdul-Manaf, N.A.; Ravirajan, P.; Balashangar, K.Thin films of CdS and CdTe semiconductor materials were electrodeposited onto glass/fluorine doped tin oxide conducting glass surfaces using a potentiostat/galvanostat equipped with a three electrode cell. Aqueous electrolytic bath containing CdCl2 and (NH4)2S2O3 was used for the electrodeposition of CdS thin films. CdTe thin films were electrodeposited onto glass/FTO/CdS substrates from aqueous solution having high concentrations of CdSO4 and low concentrations of TeO2 and CdCl2. The glass/FTO/CdS/CdTe/Cu-Au solar cell devices were prepared by thermal evaporation of Cu and Au on CdTe surface. CdS films grown were annealed at ~400 °C for 15 minutes in air and photo-electro chemical (PEC) cell measurements were performed to identify the electrical conductivity type. Both as-deposited and annealed CdS layers were identified as n-type in electrical conduction. CdS thin films were shown enhanced PEC responses upon heat treatment. The respective band gap values for as-deposited and heat treated CdS were 2.35±0.05 eV and 2.40±0.05 eV which were close to the band gap of bulk CdS. XRD analysis of as-deposited CdS layers revealed the presence of hexagonal CdS materials with the major peak arising from (002) plane. Following the CdTe deposition on glass/FTO/CdS substrate, the surface of CdTe layers were coated with a 0.1% CdCl2 solution and structures were annealed at ~400°C for 10 minutes in air. Band gaps for CdTe layers were found to be 1.45±0.02 eV for both as-deposited and annealed samples which exhibited the band gap of bulk CdTe. There was a little improvement in cubic (220) and (311) peaks of XRD spectra of annealed CdTe layers compared to the as-deposited material, but annealing exhibited a small reduction of cubic phase preferential orientation (111). SEM images showed that CdS and CdTe layers were fairly uniform. The fabricated solar cell devices showed the efficiency of 2.1% with Voc ~330 mV, Jsc~20 mA cm-2 and FF~33% under the illumination of air mass (AM) 1.5 conditions (100 mW/cm2, 1 Sun).Item Electro-deposition of Cadmium Zinc Sulphide at High Cadmium Ion Concentration, Low Zinc Ion Concentration, High Temperature and Low pH(Faculty of Graduate Studies, University of Kelaniya, 2015) Sarathchandra, K.A.D.M.S.; De Silva, D.S.M.; Pathiratne, K.A.S.Thin films are nanoscale materials which are widely used for solar cells and other optoelectronic devices. Cd(1-x)ZnxS (cadmium zinc sulphide) is formed by incorporating zinc ions to CdS (cadmium sulphide). Cd(1-x)ZnxS is a n-type semiconductor material which has a wider band gap than that of n-type CdS. Therefore, Cd(1-x)ZnxS can be used as a window material when application required low absorption of light and n-type semiconductor properties. Cd(1-x)ZnxS has been electro-deposited by varying cadmium ion concentration, zinc ion concentration, pH, deposition temperature and deposition time. Results reported here were based on the depositions conditions; 0.1 mol dm-3 cadmium ion concentration, 0.01 mol dm-3 zinc concentration, 2.45 - 2.50 pH and 50 °C deposition temperature. Electro-deposition experiments were carried out by Gamry ―series G 300‖ potentiostat while, working electrode was fluorine doped tin oxide/glass substrate, reference electrode was Ag/AgCl electrode and counter electrode was a semi-spherical graphite rod. The deposition voltage was identified from the cyclic voltammograms and shapes of the deposition current vs time plots. Electrodeposition reported in here was carried out at under-deposition voltages. The best values for electro-deposition parameters; voltage, pH, temperature and time were identified by observing their influence on the band gap values of the thin films deposited and the open circuit voltages of photo-electrochemical cell consisting of 0.1 mol dm-3 sodium thiosulphate electrolyte and the thin film semiconductor. A band gap range of 2.5 eV – 2.6 eV was obtained for Cd(1-x)ZnxS layer which is higher than the band gap of CdS. The open circuit voltage varied from -48 mV to -190 mV during optimization of voltage, pH, temperature and time. An X-ray diffraction spectrum has shown that Cd(1-x)ZnxS layer has a single hexagonal crystal phase. The crystal parameter, a = 4.1264 Å and it was lower than the standard CdS (a = 4.1364 Å). The results indicate that Cd(1-x)ZnxS thin films can be produced under the given conditions as a window layer for thin film solar cells in order to harvest more light and hence to improve the efficiency.Item Electrodeposition of (n-type) cadmium zinc sulphide thin film semiconductors for photovoltaic applications(Faculty of Graduate Studies, University of Kelaniya, 2015) Herath, H.M.N.A.; Pathiratne, K.A.S.Electrodeposition of thin film semiconductors have drawn increasing attention in the fabrication of solar cells due to its low cost and easy fabrication methodologies applicable in large scale production, compared to that of conventional Si solar cells. Among different types of semiconductor thin films, cadmium zinc sulphide (CdxZn(1-x)S) thin film is one of the promising wide band-gap window materials which can be used in fabrication of heterojunction solar cells. Electrodepostion of (CdxZn(1-x)S) on fluorine doped tin oxide conducting glass working electrode was carried out using aqueous solution of electro-purified salts of CdSO4, ZnSO4 and Na2S2O3. An EG & G model 636 bipotentiostat comprising of a graphite counter electrode and Ag/AgCl reference electrode were used to control the potential of the working electrode. Taking into account of the information obtained from cyclic voltammograms for the separate precursor salts, the three voltages of -0.9, -1.0 and -1.1 V were selected for electrodeposition. Thin films were deposited at each of the above voltages, using solutions with various proportions of Cd and Zn but the same concentration of Na2S2O3for three deposition time periods of 1, 2 and 3 hours. The pH and temperatures for all solutions used for depositions were maintained at 2.5 and 27 0C respectively. Photo-electrochemical cell measurements in 0.1 mol dm-3 Na2S2O3 electrolyte and UV-visible absorption spectroscopy were used to measure the open circuit voltages (Voc), short circuit current densities (Jsc) and band gaps of the electrodeposited thin films. The thin films with the highest observed photovoltaic activity of average Voc of - 0.156 V, Jsc of 2.6 A cm-2 and a band gap in the range of 2.05 to 2.28 eV were produced from electro-deposition solutions containing CdSO4, ZnSO4:and Na2S2O3 with 0.06, 0.04 and 0.10 mol dm-3respectively when deposited over a one hour period.Item Monitoring anti-cholinesterase contamination in Bathalagoda reservoir, Sri Lanka(University of Kelaniya, 2008) Hemachandra, C.K.; Pathiratne, A.; Pathiratne, K.A.S.Organophosphosphorus and carbamate pesticides are widely used in Sri Lanka for agricultural pest management. They may enter inland water bodies draining agricultural watersheds and affect aquatic fauna including fishery resources. These pesticides are considered as anti-cholinesterases as they could inhibit the cholinesterase enzymes including acetylcholinesterase which plays an important role in maintaining normal functioning of the nervous system. Hence monitoring of anticholinesterase contaminations in inland water bodies is important yet difficult due to low persistence of many of these pesticides. In the present study, anticholinesterase contaminations in Bathalagoda reservoir, located in the vicinity of agricultural lands in Kurunagala District were monitored bimonthly during the period September 2007 to June 2008 using brain and muscle cholinesterases (ChE) of feral Nile tilapia (Oreochromis niloticus), as a biomarker (n=IO). ChE activities were measured using standard methods established for this fish. The results show that ChE activities in brain and muscle tissues in feral fish were depressed significantly in comparison to the laboratory reared control fish by 57-72% and 59-78% respectively in September 2007 and December 2007. There were no significant gender specific differences in the ChE levels of the feral fish at each sampling stage. The brain and muscle ChE activities in the fish collected from the reservoir at each sampling stage were negatively correlated (p < 0.05) with the rainfall in the area. The depression of ChE levels in the brain and muscle tissue of feral tilapia may indicate the exposure of fish to anti-cholinesterase contaminations present in the reservoir during rainy periods.Item Evaluation of the Potential of Selected Polycyclic Aromatic Hydrocarbons in Inducing Xenobiotic Biotransformation Enzymes in Nile Tilapia(University of Kelaniya, 2007) Hemachandra, C.K.; Pathiratne, A.; Pathiratne, K.A.S.Polycyclic Aromatic Hydrocarbons (PAHs) are ubiquitous contaminants of much ecotoxicological concern in the aquatic ecosystems. They can be biotransformed in fish liver by the phase 1 CYP1A1 dependent activation enzymes such as 7-ethoxyresorufin- 0-deethylase (EROD) and the phase II detoxification enzyme, Glutathione S-transferase (GST). The present study was carried out to evaluate the potential of selected P AHs in the natural environment in inducing hepatic xenobiotic biotransformation enzymes viz. EROD and GST in Nile tilapia, a widely distributed food fish in freshwater ecosystems. The fish (n = 5-6) were treated with naphthalene (20 ~-tg/g) or phenanthrene (20 and 40 ~-tg/g) or fluoranthene ( 1, 5, and 20 11glg) or corn oil alone as the carrier (controls) and enzyme activities were determined at 1 day and 3 days after the treatment using standard methods. The results showed that the EROD activity of the fish was not affected significantly by the treatment of fish with 1 11g/g fluoranthene. However all the other PAH treatments significantly depressed the EROD activity of the fish in comparison to the controls. Hepatic GST activity of the fish was significantly increased (up to 2 folds) by the P AH treatments in a dose dependent manner. Liver somatic index of the fish was not affected by the P AH treatments. The results revealed that naphthalene, phenanthrene and fluoranthene lack the inducing ability of hepatic EROD which could produce damaging side effects through the formation of reactive intermediates that could bind covalently with cellular DNA, RNA and proteins.Item Estimation of agricultural drainage and phosphorous loading to Embilikala and Malala lagoons in the Bundala wetland systems(University of Kelaniya, 2000) Priyankarage, S.C.; Matsuno, Y.; Mallawaarachchi, A.P.; Pathiratne, K.A.S.Item Investigation of growth parameters of CuInTe2 thin films by electrodeposition technique(Research Symposium 2009 - Faculty of Graduate Studies, University of Kelaniya, 2009) Chandima, A.M.B.; Pathiratne, K.A.S.; Darmadasa, M.; Wijesundera, R.P.; de Silva, D.S.M.Copper indium di-telluride (CuInTe2) is a promising semiconductor material for photovoltaic applications because of its suitable optoelectronic properties. Among the various deposition techniques available for the preparation of CuInTe2 thin films, method of electrodeposition is an attractive technique because of its simplicity, low cost and possibility of making large area thin films. In this investigation, potentiostatic electrodeposition of CuInTe2 thin films on fluorine doped tin oxide (FTO) was studied using a three electrode electrochemical cell containing an aqueous solution of CuCl, InCl2 and TeO2. pH of the solutions was adjusted by adding ultra pure HCl. The counter electrode was a graphite rod and reference electrode was Ag/AgCl. Electrolytic solutions were prepared with deionised water and 99.995 % pure chemicals. Prior to the film deposition FTO substrates were degreased in acetone and rinsed with deionised water followed by 2 min ultra-sonication. Cyclic voltammograms were used to investigate the growth parameters; deposition potential, concentration, proportion of CuCl, InCl2 and TeO2, pH, temperature and stirring speed of the bath. In order to grow the photoactive CuInTe2 thin films, set of samples were prepared by slightly changing the deposition potential using the growth parameters obtained from cyclic voltammetric curves. Photoactive performance (Voc and Isc) of the films were characterized using I-V measurements in PEC containing aqueous solution of Na2S2O3. Highest photoactivity is given when the film deposited at -600 mV Vs Ag/AgCl for 20 min in the electrolyte containing aqueous solution of 1 mM CuCl, 20 mM InCl2 and 2 mM TeO2. Deposition temperature, pH and stirring speed of the bath were room temperature, 1.5 and 125 rpm respectively. Annealing temperature and time were 4000C and 20 minutes respectively. The preliminary results of this study suggest the possibility of growing photoactive p-CuInTe2 thin films by single step electrodepostion technique.Item Electrochemical deposition of CdS thin films using ammonium thiocynate as the sulfur source(Book of Abstracts, Annual Research Symposium 2014, 2014) Ariyasingha, N.M.; de Silva, D.S.M.; Pathiratne, K.A.S.Use of a complexing agent containing sulfur atoms which can form a charge complex with Cd2+ ions could provide a condition necessary to bring atoms or ions of both the elements Cd and S together in the form of a charge complex to the electrode surface thereby facilitating the formation of CdS on the electrode surface over other materials. In the present study, electrochemical conditions necessary to electrodeposits thin films of CdS using ammonium thiocynate as the complexing agent was studied.