Harvesting energy from human-body movements for ultra-low power appliances

Abstract

Energy harvesting from human body movements presents a promising approach to sustainably power wearable devices and sensor nodes. This study explores the potential of capturing energy from footsteps using piezoelectric technology. A critical aspect of this technology involves designing an efficient interface between the piezoelectric elements and the electrical load to maximize energy conversion. The irregular and low-frequency nature of human footsteps poses a significant challenge, resulting in low energy extraction. Moreover, achieving a self-powered circuit adds another layer of complexity. To address these challenges, a novel Parallel-Synchronous Switching Harvesting on Inductor (P-SSHI) circuit is proposed. This circuit increases the energy extraction efficiency of piezoelectric elements. Since the output of a piezoelectric element is in the form of alternating current (AC), a MOSFET-based full-bridge rectifier circuit is proposed to convert AC to direct current (DC). As proof of concept, a shoe insole integrated with multiple piezoelectric elements connected in parallel was developed, and the energy conversion circuit was rigorously validated. The system was tested at a frequency of 1 Hz, which corresponds to the typical walking frequency, using a person weighing 60 kg. Under these conditions, the proposed system achieved an average power output of 550 µW per step with a 10 kΩ resistive load and a 10 µF storage capacitor. The effectiveness of the system was further validated by demonstrating its ability to charge a 1 mF capacitor to 2.1 V in 18 steps and a 10 µF capacitor to 7.0 V in a single step. Notably, the circuit is self-powered and capable of initiating operation without the assistance of an external battery, highlighting its potential for autonomous use. The circuit was prototyped using simple discrete components, emphasizing its practicality and feasibility for real-world applications. The proposed MOSFET-based rectifier circuit offers a significant advantage in converting AC to DC with minimal voltage drop, compared to conventional diode full-bridge rectifiers. Furthermore, the system's capability to charge a Li-ion battery (3.7 V, 300 mAh) was demonstrated, showcasing the potential of the wearable piezoelectric energy harvesting system to provide a sustainable power supply for wearable wireless sensors. Future studies will focus on optimizing energy harvesting under different walking conditions, integrating energy storage devices, and enhancing durability. The proposed technology also shows promise for applications in diverse fields such as healthcare, fitness monitoring, and environmental sensing, where reliable, self-sustaining wearable power solutions are in high demand.

Description

Keywords

Energy harvesting, Piezoelectric, Self-powered, Synchronized switching, Sustainable energy

Citation

Gunarathna T. G. L.; Rupasingha U. S. D. B. M.; Gunasekara H. S.; Thennakoon S. E. R. T. M. M. I.; Senanayake S. V.; Leanage H. B.; Kumarage W. G. C.; Ranaweera A. L. A. K. (2024), Harvesting energy from human-body movements for ultra-low power appliances, Proceedings of the International Conference on Applied and Pure Sciences (ICAPS 2024-Kelaniya) Volume 4, Faculty of Science, University of Kelaniya Sri Lanka. Page 216

Collections

Endorsement

Review

Supplemented By

Referenced By