Abstract:
In this thesis, a speaker independent speech recognition system was built to recognize
the continuous Sinhala speech sentences using the toolkit, HTK-3.4. I based on the
statistical approach, Hidden Markov Model (HMM). Three hundred sentences were
considered for recording. Data recordings were done with 50 males and 50 females
and testing was performed by 10 speakers who had and had not participated for the
training. The recognized sequence of words are the commands to automate home
appliances such as light, television and radio etc., to help people with differently-able
to operate equipment.
The different feature extraction methods such as Mel Frequency Cepstral Coefficient
(MFCC), Perceptual Linear Prediction (PLP), Linear Predictive Coding (LPC), Bark
Frequency Cepstral Coefficients (BFCC), Linear Prediction Reflection Coefficients
(LPREFC), LPC Cepstral Coefficients (LPCEPSTRA), log mel-filter bank channel
outputs (FBANK) and linear mel-filter bank channel outputs (MELSPEC) were used
with different number of feature parameters varied between 4 to 12 by adding log
energy coefficients, and their first, second and third derivatives in order to find the
optimal number of parameters for each method. The context-independent and contextdependent
acoustic models: word-internal and cross-word triphones and tied state
triphones were developed. Decision tree state clustering method was applied for
creating tied state triphones and the optimal threshold values for the outlier threshold
(RO) and the threshold controlling clustering termination (TB) were determined to
create the phonetic decision tree in order to get the optimal result. Finally, tied state
triphone based multiple mixture models were applied with 2 mixture, 4 mixture, 8
mixture, 16 mixture and 32 mixture systems. The comparison of above mentioned
approaches is discussed in detail.
The speech recognition system was physically implemented to provide access from a
PC or laptop, based on Arduino UNO board (ATmega328 microcontroller). The
identified command is transferred to the Arduino UNO board through serial
communication and then a signal is transmitted using Radio Frequency (RF) to operate
an electrical home appliance using a wireless transceiver module.
